|
| With its serrated edge, the HAX is Michael's version of a hacksaw blade for scoring and manicuring. It is designed specifically for clay, especially for fine particle clay like porcelain. The HAX tool is made of flexible, bendable stainless steel and it can be bent for rounded surfaces and hard to reach areas. |
 | MTHAX
|
|
| Made from the highest quality stainless steel, this scraper is flexible and bendable. |
 | MSSL
6" x 1.375" |
|
| EXTRA FINE 24-TOOTH |
 | MSSL24
6" x 1.375" |
|
| FINE 18-TOOTH |
 | MSSL18
6" x 1.375" |
|
| Mudtools Mudcutter designed by Michael Sherrill is the perfect tool for cutting and slicing clay. The Mudcutter was designed to go around a 4" pug or extrusion. It is excellent for production pots, cutting spouts, lugs and faceting. It also acts as a needle tool to even rims, but with more precision. Mudcutter is made from stainless steel with a surgical stainless steel wire under tension and will never rust. |
 | MUDCUTTER
|
|
 | MTRW
SET OF 3 |
|
| Mudtools blue rib is the firmest of all the Mudtool ribs. This rib is stiff enough for throwing large pieces and for burnishing, but is still flexible. These ribs are made from a flexible material that performs well and actually gets better with use. Mudtools are designed by artist Michael Sherrill, and are made with the artist in mind. They are the best ribs you'll ever use. |
 | MTB0
2.75" x 1.44" |
 | MTB1
3.5" x 1.75" |
 | MTB2
2.88" x 2.5" |
 | MTB3
5" x 1.94" |
 | MTB4
4.19" x 2" |
 | MTB5
4.19" x 2" |
|
| The chartreuse rib is perfect for compressing the bottom of pots on the wheel and smoothing marks on stiffer clay. Mudtool ribs are made from a flexible material that performs well and actually becomes nicer and smoother with age. These ribs are not rubber so they don't burr like other flexible ribs. |
 | MTC0
2.75" x 1.44" |
 | MTC1
3.5" x 1.75" |
 | MTC2
2.88" x 2.5" |
 | MTC3
5" x 1.94" |
 | MTC4
4.19" x 2" |
 | MTC5
4.19" x 2" |
|
| The Mudtools yellow rib is ideal for smoothing and burnishing marks left from trimming, throwing or handbuilding. These ribs are made from a flexible material that performs well and actually gets better with use, it self-polishes. Unlike rubber this material will not burr, crack or chip. |
 | MTY0
2.75" x 1.44" |
 | MTY1
3.5" x 1.75" |
 | MTY2
2.88" x 2.5" |
 | MTY3
5" x 1.94" |
 | MTY4
4.19" x 2" |
 | MTY5
4.19" x 2" |
|
| The Mudtools red rib is the softest of all the Mudtool ribs. It is ideal for compressing slabs in handbuilding or burnishing rims in place of a chamois. These ribs are made from a flexible material that performs well and actually gets better with use, it self-polishes. This material is not rubber and will not burr, crack or chip. |
 | MTR0
2.75" x 1.44" |
 | MTR1
3.5" x 1.75" |
 | MTR2
2.88" x 2.5" |
 | MTR3
5" x 1.94" |
 | MTR4
4.19" x 2" |
 | MTR5
4.19" x 2" |
|
| Made from the highest quality stainless steel, this scraper is flexible and bendable. |
 | MSSP
3.25" x 2.625" |
|
| 24-tooth serrated |
 | MSSP24
3.25" x 2.625" |
|
| 18-TOOTH SERRATED |
 | MSSP18
3.25" x 2.625" |
|
| Artist Michael Sherrill has designed Mudtools. These tools are for artists, designed by an artist. His shredder is a sheer form found at most hardware stores, designed to work with clay. This tool carves away clay fast, has a soft comfortable handle and will never clog. |
 | MTS1
|
|
| Shaped like the traditional kidney rib, this synthetic sponge is the best tough and consistent sponge available to potters today. |
 | MTS
4.19" x 2" |
|
| Mudtools understands that there are times when you just need a stainless steel rib. In fact, some people prefer stainless steel over other choices for some of their work. These ribs are constructed from the finest cutlery grade, flexible stainless steel available. |
 | MSS0
|
 | MSS1
|
| MSS2
|
| MSS4
|
| MSS5
|
| MSSH01
|
|
| The Zipper Bridge and Die Kit is designed to fit any 4" square extruder.
-ZIPPER BRIDGE
The Zipper Bridge reknits the clay which eliminates seam failure during drying and firing and also allows for immediate manipulation of your extrusion into other forms.
-PRECISION RADIUS DIES
Very strong and smooth extrusion allows the clay to flow through the die into compression and flow out so you can work directly out of the extruder with out sharp edges that could make your extrusion fail.
-VARIABLE WALL THICKNESSES
Quickly and easily change the internal die to change the wall thickness of your extrusion.
-HIGHEST QUALITY MATERIAL AVAILABLE
Water and corrosion resistant
This tool should provide you with a lifetime of service. |
 | MTDIESET
|
|
